D85C30
UART Core with SDLC Function
Description
The D85C30 is a dual channel USART (Universal Synchronous/Asynchronous Receiver/Transmitter) device, designed for use with 8 and 16-bit microprocessors. It works as serial-to-parallel, parallel-to-serial converter/controller and can be software-configured to satisfy wide range of serial communications applications. The device contains variety of new, sophisticated internal functions, including on-chip baud rate generators. The D85C30 handles asynchronous formats, synchronous byte-oriented protocols (such as IBM® Bisync) and synchronous bit-oriented protocols, like HDLC and IBM SDLC. This versatile device supports virtually any serial data transfer application (telecommunication, LAN, etc.). It can also can generate and check CRC codes in any synchronous mode and can be programmed to check data integrity in various modes. The D85C30 supports modem control in both channels – in applications where these controls are not needed, modem controls can be used for general-purpose I/O. You can configure the IP Core to handle all synchronous formats, regardless of data size, number of stop bits or parity requirements. The D85C30 is controlled through access to 14 Write registers and 7 Read registers per channel (the number of the registers varies depending on the version). Within each operating mode the D85C30 allows protocol variations by checking odd or even parity bits, character insertion or deletion, CRC generation, checking break and abort generation and detection, and many other protocol-dependent features.
Key features
- Software compatible with Z85C30
- Dual Channel: A, B
- Configuration capability
- Asynchronous mode:
- Asynchronous (x16, x32, or x64 clock
- Isochronous (x1 clock)
- Character-Oriented mode:
- Monosynchronous
- Bisynchronous
- External Synchronous
- Bit-Oriented mode:
- SDLC/HDLC
- SDLC/HDLC Loop
- Complete status reporting capabilities
- Receiver data FIFO and Error FIFO
- SDLC Frame FIFO
- Data encoder\decoder:
- NRZ, NRZI
- FM0, FM1
- Manchester (require external logic)
- Line break generation and detection
- Internal diagnostic capabilities:
- Loop-back controls for communications link fault isolation
- Auto Echo
- Break, parity, overrun, framing error simulation
- Fully synchronous design with no internal tristate buffers
Similar products
The DHDLC IP Core provides versatile support for a widely used HDLC transmission protocol. It manages the bit stuffing process,...
+ Receiver and transmitter interfaces
+ Supports CRC16 and CRC32
+ Bit stuffing and unstuffing
The DμART is a soft core of a Universal Asynchronous Receiver/Transmitter (UART). It performs serial-to-parallel conversion on data characters received from...
Majority Voting Logic
Adds or deletes standard asynchronous communication bits (start, stop, and parity) to or from serial data
In UART mode receiver and transmitter are double buffered to eliminate the need for precise synchronization between the CPU and serial data
The I2C is a two-wire, bi-directional serial bus, which provides a simple and efficient method of short distance data transmission between...
+ Conforms to v.3.0 I2C specification
+ Master transmitter
+ Master receiver